Hi folks!
Now, I have problem with Telsey's STB FS6 (smp8634 based). Problem is that I downloaded one big file to his permanent memory and can't erase it. Consequences are that I can access web administration console, but can't apply any changes to it.
I tried to 'reinstall' firmware, but installing it didn't erease user memory. I contacted Telsey support about it, but it takes awhile to response so I decided to ask you guys...
I don't have telnet access (don't know user/password), so can not access stb via shell.
My idea was to start stb with network boot and to manually delete file from memory. Problem is that I don't have any recovery image which will enable ethernet interface and start ssh or telnet service. JTAG is not an option.
Do you guys have any idea what to do? :)
the network boot is indeed the only option.
you would need a signed firmware image that is accepted by your box, this will overwrite your complete flash so you should have a working system again.
the network boot is indeed the only option.
you would need a signed firmware image that is accepted by your box, this will overwrite your complete flash so you should have a working system again.
Sorry for my late reply.... It wasn't a solution, upgrading/downgrading firmware left this particular file intact. Problem was solved by manually deleting file trough shell (root access).