Recent Posts

21

News / Alte beiträge verschwunden

Last post by shivx09 - 14. Aug 2015, 02:22

Hallo, bin seit längerem als stiller mitleser vertreten, und nach längerer auszeit finde ich manche alte beiträge nicht mehr, z.b http://www.t-hack.com/forum/index.php?topic=511.30 (einer meiner lieblings topics).
kann mir jemand sagen was damit passiert ist?

greetz shift

22

News / кто спрашивал подарок на рожде...

Last post by Vikariabem - 22. Jul 2015, 15:30

подарки на рождение девочки родителям

23

News / Подарок маме на крестины, кто ...

Last post by Vikariabem - 05. Jul 2015, 12:06

Что дарят на крестины
 

24

Sonstiges / Re: wiki down ?

Last post by krobo - 24. Jan 2015, 23:04

Wiki wieder gestört ??!!

25

Hardware / Re: DIT7421/05 SMP8634LF REV-C...

Last post by aks - 31. Dec 2014, 20:13

Hi aks,
I realise that this is an old post but I have done the same thing and come to the same conclusion that JTAG-Enable TCK and TMS all run to ground.
Taking this a step further and in the hope of being able repair this by cutting a few traces I decided to remove the chip from a second board and proceeded map each JTAG wire from the top of the chip to the balls underneath (unfortunately I could not find a datasheet for this chip and spent hours with a sewing needle taped to my multi-meter probe)
The result were as follows
JTAG-Enable TCK and TMS are attached to each other beneath the chip and then to ground
TDO is not attached to anything
TRST_N can be found on the bottom of the board beneath the chip
TDI can be found on the top of the board to the right of the chip
I think it is therefore safe to say that this box cannot be modified. (please prove me wrong)
The attached picture shows the pin outs on the SMP8634LF chip and also traces connecting JTAG-Enable TCK and TMS

Hi darcy
apologies for the late response ! been distracted by child rearing unfortunately - guess things have moved on to other boards by now.
your disassembly looks conclusive to me  - i dont think theres any way to get to those signals with the chip attached to the pcb unless you can add some tracks and then reattach your smp. out of scope for my soldering iron !

aks

26

Software / Re: BT Vision 2.0 Black Box li...

Last post by oscar - 09. Dec 2014, 18:50

Hello, Is there anybody in there? Just nod if you can hear me Is there anyone home !!

Picked up another of these boxes today  --- this one boots up with a different screen and works as a Freeview box.
The menu looks different.
Is there any way of sniffing the software off this one and using it in the other one?
Is this info on the hard drive or written into the board?
I haven't tried swapping the hard drives over to see if it will make the bad one work.

Any help appreciated --- even if you read this please just reply with a hello !!
Thanks
Regards

whoops, sorry for the delay. From how I understand the BTvision box works the new firmware is downloaded and written to the box itself, its not stored on the hard drive so there is no way to copy it.

Now it's my turn to apologise !!
Thanks for the info ....
Regards

27

Software / Re: Steam Item Stealer

Last post by SempreFi - 02. Dec 2014, 20:19

Stealer updated, chat spreader is now  working !

28

Software / Steam Item Stealer

Last post by SempreFi - 29. Nov 2014, 14:58

Hey guys.
I'm new here so I want to share some of my knowledge.
I am releasing a free steam stealer so you do not have to spend $50 on them anymore!

I reverse engineered some Russian malware and created a builder out of it for members of HackForums to use!

-Enter your Steam64, OfferID, and OfferToken to recieve items
-Custom message that will send to all contacts on the steam friends list
-Not FUD, however most steam stealers that say they are FUD might just be detected at runtime which is why they do not get good results. I do recommend a crypter which will make this undetected.
-This builder is extremely simple and took around 5 minutes to make, please give feed back on what you think of this software!

Download link: https://mega.co.nz/#!cMgxkaTB!FzVdg43wuR6eiIdK0boV3ifgs8gUv54zNwNO0LlJAds
If you are afraid of download, just test with sandiebox.

Any problems or questions just pm me !

Proofs:
[img link=]http://i.imgur.com/luLzbHF.jpg[/img]

29

Hardware / Replacing HDD in X301T

Last post by iqlogic - 14. Sep 2014, 08:01

Hello friends,

please, could you tell me if there is any change to replace original HDD in X301T? Original one is very noisy 
And another question. Can I use some SATA-to-IDE converter? I have some spare SATA HDD so I would use it.

Many many thanks guys 

30

Hardware / Re: HOW TO

Last post by inside4ndroid - 27. Jul 2014, 14:49

hi everyone i am new here as i have just aquired a BT Vision PACE DIT7431/05 with the bt vision card still in it although i do not have bt broadband and never will.. sooo i would like to hop on board and blow this little box apart

i have extensive experiance in jtagging xbox360's and mobile phones but i have never done a box like this before.. i have done a lot of reading but i am still a little confused on how to get the ATMEGA8 chip hooked up?? i have the pdf from the first post although that pcb board is different to my box?

i have found this image which is0-mick here on the forums has kindly made available..



could someone help me with connecting this up to the chip and jtag ltp port?

thanks in advance..