29. Mar 2024, 13:23

Recent Posts

Pages: 1 2 3 [4] 5 6 ... 10
31
Hardware / MR 303 / neue Hardware in Sich...
Last post by jb24 - 01. Jan 2014, 16:05
Hallo,

hat sich jemand schon einmal den neueren Media Receiver 303 angeschaut? Gibt es da schon Möglichkeiten Ihn zu modifizieren? Irgendwelche Hacks bekannt?

Zudem weiss jemand, ob die Telekom ganz neue Hardware plant (neuer Media Receiver)?

Gruß
jb24
32
Software / Re: BT Vision 2.0 Black Box li...
Last post by oscar - 17. Dec 2013, 17:38
Hello.
I've been reading all over the place regarding the Black Pace BTVision + box.
I do not have a BT hub or BT BB.
I picked up one of these boxes and can download the software to it by holding buttons in etc (one cog 2 cogs etc) then I get a C03 error and that is the end of that.
If I press the "BT Vision" button on the remote when the box is setting up I can get to  a "channel scan" menu.
Selecting scan simply stays at 0%.
If I press the "ON Demand" button the box resets and sets up again.
A second press of the "On demand" button starts another software down load.

Any suggestions please ---keep it clean ?!!
Thanks
33
Software / Re: BT Vision Box Hidden Menus
Last post by doobleshaft - 30. Nov 2013, 21:38
Interesting....

I lose my pretty poor BT Broadband in a few days time and so will lose this BT Vision Box too.

It could be interesting to find all the relevant info on each version of the boxes and collate it.

Questions I can think of which I need to research are:-

Dependent on whether my box is model that can be modded, which ATMEGA chip is the best one to use? There are a few and it looks like Arduino v3 may be a good way to work on them. USB programmers have been found too...

How do we get this hidden menu? This information does look like it may be a way to access useful features and has given some useful info but I'm not convinced a modified JPG/GIF will do it. Perhaps I'm wrong there though.

What software is available that anyone has been able to get to use on the box? For example has anyone got XBMC to work or are we as suggested on one thread better off sticking with Win CE?

It could be time for a new thread which brings the latest research with latest info together as most of the threads I've seen have been 2-3 years old. Once I lose the service I'll be happy to start modding it.
34
WinCE / Re: tv2remotekeys ?
Last post by Mulder3 - 14. Oct 2013, 21:59

It's a silver box running Windows CE. It has not been chipped or modified in anyway.

So this must mean a modified box is required to get tv2remotekeys.exe running and ready to accept commands on port 8082.


No, it depends, some providers have tv2remotekeys.exe enabled on their STBs... some not...

If tv2remotekeys is not enabled on your STB, you can enable it, but you'll need to patch the MS(err... now Ericsson...) bootloader...


The only other way I can think of to get tv2remotekeys.exe running on an unmodified box is to make use of the Windows CE Autorun facility and have an .exe on a usb stick that is set to run "C:\Windows\tv2remotekeys.exe". When I plug a usb stick into the BT Vision box, its light flashes, so Windows CE is reading it looking for an autorun. In fact, one of my USB sticks makes the BT Vision box freeze until I remove it.


LOL :) Easy, Cowboy... That will not not work :)
I'm not even sure WinCE implements Autorun...




Or if I could get back into the secret menu and run the Ajax/CSS test and make it load a specially crafted gif/jpg to execute custom code.


You don't need that Secret Menu, just use Wireshark then load some interative tv app from your provider... You will see tons of PNG/JPEGs...
Now, you can just set some form of dns spoofing and the STB will load your images...
35
Hardware / Media Receiver 303 Typ A
Last post by Hummelchen - 23. Sep 2013, 10:01
Guten Morgen!

Drei Fragen auch in dieser Rubrik zum o.a. Receiver!

1) Ist das der aktuelle Receiver der Telekom oder haben die mir hier eine alte Hardware geschickt (5€/Monatsmiete) und ich hätte eigentlich ein neueres Gerät bekommen sollen/müssen?
2) Wie kann man die Jugendschutz-PIN-Abfrage deaktivieren?
3) Gibt es eine Receiversoftware, die ggf. mehr Einstellmöglichkeiten/Optionen bietet als die Standard-Software?

Vielen Dank,
Hummelchen
36
Sonstiges / Fragen - Media Receiver 303 Ty...
Last post by Hummelchen - 23. Sep 2013, 09:57
Hallo!

Hier ein paar Daten des 303 nach drei Stunden Laufzeig:

Telekomvertrag:
Entertain Comfort Plus (ohne irgendein Zusatz-TV-Paket)

System:
TV2 client version: 2.2.28218.1004
Bootstrap ROM version: 2.8027

Ressourcen:
Verf. IPTV Kanäle: -SD / -HD (WAN), 2SD / 0HD (Dev)

Programmübersicht:
Datenversion: 3281

Fragen:
1) Bin ich Softwaretechnisch (siehe angaben unter System) up-2-date?
1a) wenn 1) = ja = ok
1b) wenn 1) = nein = wie (manuell) updaten? 4x an und aus = kein Updatestart!

2) Warum steht bei 'verf. IPTV-Kanäle' NICHTS an Zahlen sondern überall nur '-'?
2a) Sollte er hier nicht anzeigen, wie viele SD und wie viele HD-Sender er gefunden hat?
2b) Habe auch schon die HD-Option mal aktiviert und rebootet, doch unter 'verg. IPTV-Kanäle' war immer noch überall '-'! Ich habe doch die Öffentlich Rechtlichen HD-Sender eigentlich frei!

3) Welche Programme kann man mit 'Entertain Comfort Plus (OHNE Zusatz-TV-Paket)' alles empfangen? Gibt es da irgendwo eine Liste der Sender?

Vielen Dank,
Hummelchen
37
Software / Media Receiver 303 Typ A
Last post by Hummelchen - 23. Sep 2013, 09:57
Guten Morgen!

Habe den o.a. Receiver am Freitag bekommen!

Fragen hierzu wären bzgl. Software:
1) Gibt es zu dem Gerät sinnvolle Mods/Tweaks/Hacks?
2) Wenn 1) ja, welche (Downloadlinks) und wozu dienen Sie (Erklärung/Tut)?

Vielen Dank,
Hummelchen
38
WinCE / Re: tv2remotekeys ?
Last post by VisionUser - 16. Sep 2013, 22:25

This stuff was a very long time ago.
Maybe they ditched this stuff, or the box you are trying is not running windows CE and is running the linux version?

Mick


It's a silver box running Windows CE. It has not been chipped or modified in anyway.

So this must mean a modified box is required to get tv2remotekeys.exe running and ready to accept commands on port 8082.

The only other way I can think of to get tv2remotekeys.exe running on an unmodified box is to make use of the Windows CE Autorun facility and have an .exe on a usb stick that is set to run "C:\Windows\tv2remotekeys.exe". When I plug a usb stick into the BT Vision box, its light flashes, so Windows CE is reading it looking for an autorun. In fact, one of my USB sticks makes the BT Vision box freeze until I remove it.

Or if I could get back into the secret menu and run the Ajax/CSS test and make it load a specially crafted gif/jpg to execute custom code.
39
WinCE / Re: tv2remotekeys ?
Last post by is0-mick - 15. Sep 2013, 20:04
This stuff was a very long time ago.
Maybe they ditched this stuff, or the box you are trying is not running windows CE and is running the linux version?

Mick
40
WinCE / Re: tv2remotekeys ?
Last post by VisionUser - 12. Sep 2013, 16:00
Do you need a chipped box for this to work?

I tried connecting with Telnet to [boxip]:8082 on my unmodified BT Vision box but it said "unable to connect to remote host: connection refused"

Port 8080 seems to be the only open port on my BT vision box, but it does not respond or reply with anything at all, not even a "hello". Accessing [boxip]:8080/key=[number] in a browser just gives a blank page.
Pages: 1 2 3 [4] 5 6 ... 10